MASTER DIGITAL SPI SHD LED strips
Dynamically controlled LED pixels, with very high dense LEDs (248x/m) are especially suitable for very low profile diffused architectural and sculpture lighting. Superior density allows almost dot-free lighting from about 1m even without diffusers, thus moving the whole lighting to very new dimension. This very dense LED strip is especially suitable for all glass sculpture lighting application. Its high power is able to deliver great lighting peaks, which will attract many customers from larger distance than lower powered strips. That is why this LED strip is beeing developed in 2 power factors : deco (6.2W per each color if all pixels are ON) and POWER (20W per colour if all LEDs are ON) Please note : for best lifetime and parameters, it is highly advised not to run : each pixel on more than 100% of 1 colour at a time, or design a custom effects which will make sure if certain LEDs and more than 1 colour will be 100% bright , the other LEDs will be off or dimmed to much lower value. This way you will make sure, the great power allowed in the LED strips will not affect the whole instalaltion and its current and thermall limits.
This LED strip is not porduced using our Constant current drivers, and it doesnt have some of the MASTER features.
Technical parameters of 1 single LED pixel : DECO power version
no of SPI channels per 1pixel : 3
RGB wavelength (R/G/B in nm) : 622/527/467 nm
Current per each colour (mA) : 5mA
Current per White colour (mA) : 15mA/LED
LED SMD size : 2020
Umin (Min. voltage) : 3.8V
SPI protocol : WS2812, 3-wire system, 800KHz
Brightness (mcd0 (R/G/B) : 75/230/35/ All ON=White=300
Static current : 0.8mA/pixel
ESD : 6000V HBM model
Technical parameters of 1 single LED pixel : High POWER version
no of SPI channels per 1pixel : 3
RGB wavelength (R/G/B in nm) : 622/527/467 nm
Current per each colour (mA) : 16mA
Current per White colour (mA) : 48mA/LED
LED SMD size : 2020
Umin (Min. voltage) : 3.8V
SPI protocol : WS2812, 3-wire system, 800Khz
Lm output (R/G/B) :
Static current : 0.8mA/pixel
ESD : 6000V HBM model
Technical parameters DECO power version per meter :
FCB width : 8mm
LED axial distance : 4.03mm
no. of LEDs/m : 248
Nominal Voltage : 5VDC
Current draw @ 1colour only : 1,3A
Current draw @W (All channels ON) : 3,92A
El. power @W (All channels ON) : 19.6W/m
IP : 20
FCB max. current path : 4000mA
Viewing angle : 120°
Static current : 198mA
Technical parameters High POWER version per meter :
FCB width : 8mm
LED axial distance : 4.03mm
no. of LEDs/m : 248
Nominal Voltage : 5VDC
Current draw @ 1colour only : 4A
Current draw @W (All channels ON) : 12A
El. power @All channels powered : 60W/m
IP : 20
FCB max. current path : 4000mA
Viewing angle : 120°
Static current : 198mA
